拓尔微电子有限责任公司
搜索

中文 丨 EN

微信截图_20200914144318
浏览量:
1000

TMI6283H

零售价
0.0
元
市场价
0.0
元
浏览量:
1000
产品编号
Vin Range (V):
2.4 to 18
Current Limit (A):
2
Rds(on) (mΩ):
100
Output Reverse Voltage Protection:
Y
FLAG Signal:
N
Output Discharge:
Y
EN Logic:
H
Package:
QFN3*3-16
Status:
ES
数量
-
+
库存:
0
所属分类
返回列表
1
资质荣誉
FEATURES
参数
GENERAL DESCRIPTION
APPLICATIONS
TYPICAL APPILCATION

  • 2.7V to 18V Input Voltage Range of VIN1

  • 5.8V Input Over Voltage Clamp of OUT1

  • 18.9V Input Voltage OVP of VIN1

  • Low Rds(on): 60mΩ typical between VIN1 to OUT1

  • Low Quiescent Current: 45μA typical of Switch1

  • Low Shutdown Current: 2μA typical of Switch1

  • Externally Programmable Soft-start Time

  • Output Auto Discharge Function

  • Over Current Protection

  • Output Short Protection

  • Adjustable Current Limit 0.3A to 3.5A (typ.) of Switch2

  • Reverse Current Flow Blocking

  • Deglitched Open-Drain Over-Current Flag Output 

  • Thermal Shutdown Protection

  • Available in a 16-pin 3mm x 3mm QFN Package

未找到相应参数组，请于后台属性模板中添加

TMI6283H is composed of one channel power switch (Switch1) and one channel load switch (Switch2) in a 16-pin 3mm x 3mm QFN Package. The device can be used in series with the front and back stages, or the two chips can be used separately.

The Switch1 is a single channel line power switch with low on-resistance 60mΩ typical. Input voltage range could support from 2.7V to 18V with 5.8V output voltage clamp and 18.9V input overvoltage protection. The switch1 is controlled by an active high enable pin. A programmable soft-start function could be used to set the proper rising time to reduce inrush current caused by large load capacitance. Current protection and thermal shutdown function protect the device against over current and high junction temperature.

The Switch2 is a cost-effective, low voltage, single P-MOSFET load switch. The switch operates with inputs ranging from 2.5V to 6V, The switch's low Rds(on) 60mΩ with meets USB voltage drop requirements. A built-in P-channel MOSFET with true shutdown function to eliminate any reversed current flow across the switch when it is powered off. When the output voltage is higher than input voltage, the power switch is turned off by internal output reverse-voltage comparator. The Switch2 offers a programmable curre nt limit threshold via an external resistor on ILIMIT2 pin to GND. FLAG2 is an open-drain output report over-current or over temperature event. In addition, FLAG2 also has typical 2.5ms deglitch timeout period and reports output reverse-voltage condition.

  •  Solid State Drives

  •  Flat Panel Television and Monitor

  •  Digital Set Top Boxes

  •  Industrial Systems

  •  Distributed Power Systems

  •  Surveillance Systems

  •  Personal Communication Devices

  •  USB Bus/Self Powered Hubs

  •  Battery-Charger Circuits

上一个
无
下一个
TMI6267AH

相关文件

TMI6283H_DS_EN_V1.1
TMI6283H_DS_EN_V1.1
分类:
其他下载
文件大小:
190KB
下载量:
274
2020-09-14 16:32:00
所属人群:
默认级别
上一页
1

Copyright © 2019 拓尔微电子股份有限公司   陕ICP备18001394号-1     网站建设：中企动力 西安

样品申请

在线申请

客服热线

18824635685

微信咨询

扫一扫添加
微信

TOP